How much do you know about laptop computers? As the needs continue to change, there are more and more laptop users. However, the technology of anything is limited. There will always be some problems after using it for a long time. Just take For example, if you use a laptop for a long time, some dust will enter it, which seriously affects the computer's running speed and heat dissipation. So do you know how to disassemble a laptop? Everyone knows about HP computers. Let me take the HP 6535s as an example to introduce how to disassemble this product!
A general introduction to HP 6535s
HP’s Compaq 6535s laptop uses the PUMA platform design. The new platform design has improved performance a lot. First of all, the AMD Turion X2 RM-70 processor with a main frequency of up to 2GHz brings strong performance to users. Secondly, the ATI Radeon HD 3200 graphics card integrated by PUMA supports DX10 special effects, supports ATI Avivo HD technology, and performs well in video decoding.
Preparation of HP 6535s disassembly tools
Prepare a Phillips screwdriver, a T8 hexagonal screwdriver, a brush and a piece of thermal grease.
HP 6535s disassembly steps/methods
Step 1: Remove the cover plate. First take off the battery. The two most important covers at the back are the memory wireless cover and the hard drive cover. Each cover is fixed with two screws, and the cover can be removed directly after unscrewing it.
Step 2: Remove the keyboard. After all the screws on the back of the notebook are unscrewed, the keyboard fixing device has been loosened. You can directly open the keyboard, pull out the keyboard cable, and remove the keyboard.
Step 3: Remove the C shell. The shell under the keyboard is called the C shell. Inside the several frames in the picture are the fan cables, switch cables, and touchpad cables. After they are all unplugged, unscrew the fixing screws on the C shell and you can remove the C shell in seconds. The shell has been removed.
Step 4: Remove the motherboard. The four places marked in the picture are the screws that fix the motherboard. After unscrewing the screws, pull out all the connecting wires on the motherboard. Then take off the motherboard.
Step 5: Remove the fan. Fixing the fan is very simple. You only need to unscrew the six screws that fix the fan heat sink. The fan can be taken off and cleaned.
Precautions
Before disassembling the machine, remove static electricity from the human body, and make sure the computer is turned off and the power cord is unplugged to ensure that the disassembly work can be completed smoothly.
The above is the detailed disassembly procedure of the HP 6535s laptop that the editor has introduced to you. I believe that everyone already understands it. Everyone should know that disassembling a phone is a very delicate job. As long as you are careful, the disassembly will not fail. But everyone must be careful when disassembling the computer and be careful not to damage some parts on the computer. Of course, the disassembly steps for other models of HP notebooks are similar to those for the HP 6535s, so you can refer to them. Of course, the performance of the HP 6535s computer itself is quite good, and many people prefer it.