Laptops are no stranger to today’s young people! With the continuous development of network technology, computers are playing an increasingly important role, and all walks of life are inseparable from computers. Therefore, many computer brands have appeared on the market in recent years. Everyone should know Dell! This is a very famous brand. Laptops have many advantages and are deeply loved by people. However, due to their small space, they have to be disassembled and cleaned regularly. Let me take the Dell d610 as an example to introduce the disassembly steps!

Dell d610 disassembly tools preparation

· Phillips screwdriver

· Tweezers

· Hair brush

Steps to disassemble Dell d610

1. Remove the back. First remove the battery, then remove all the small covers on the bottom case, and then unscrew all the screws on the bottom case. The optical drive is fixed with only one screw. After unscrewing it, pull it out directly. After taking out the optical drive, unscrew the three screws under the optical drive.

2. Remove the keyboard frame. After all the screws on the back are unscrewed, you can go to the keyboard side and pull out the keyboard frame directly. However, there are some small plastic hidden buckles around it, so be careful not to break them.

3. Remove the keyboard. After taking off the keyboard frame, you can see that there are several screws on the upper side fixing the keyboard. After unscrewing the screws, flip the keyboard up and unplug the keyboard cable at the back, then the keyboard can be taken off directly.

4. Remove the C shell. After the keyboard frame and keyboard are removed, unscrew the screws visible under the keyboard, remove the touchpad cable, and remove the C case.

5. Remove the hard drive. There is a ribbon cable above the hard drive that connects the motherboard and the external board. First remove the ribbon cable, then unscrew the screws that secure the hard drive and remove the hard drive.

6. Remove the motherboard connector and screws. There are many interfaces for built-in functional devices on the motherboard, such as speaker cables, fan cables, microphone interfaces, screen cable interfaces, etc. There are also many numbered screws on the motherboard. Unscrew all the numbered screws.

7. Remove the screen cable interface. The screen cable interface is a relatively large and fragile interface, and is extremely important. Be sure to pay attention to the amount of force when removing the screen cable interface.

8. After all the interfaces on the motherboard are processed, the care board can be taken out. The heat sink is fixed on the CPU and can be removed by unscrewing four screws.

　Precautions

　· Do not use excessive force when disassembling the screen cable interface.

The above is what the editor introduces to you about Dell d610 notebook Detailed disassembly steps. Generally speaking, the disassembly method of this computer is relatively simple, and it is not too difficult to operate. The configuration of the Dell d610 computer is also very good. It is one of the cost-effective models. If you like it, you can check it out, but this computer has been discontinued now. But I believe that other styles of Dell notebooks will also attract everyone's attention.