As the temperature rises in summer, the heat emitted by the notebook itself during operation, coupled with the "heat preservation" effect of dust, makes the computer prone to overheating. It will restart inexplicably, so what can be done to avoid this situation? At this time, it is time to clean the laptop. Below, the editor will introduce to you the detailed steps of laptop cleaning .

Step

First of all, prepare some tools that will be used when disassembling and cleaning the machine, such as screwdrivers, air blowers, brushes, etc. In addition, prepare some thermal grease. As for other tools, they are optional. In addition, in order to ensure safety when disassembling the machine, we also need to unplug the power supply of the notebook.

Detailed steps for notebook cleaning

The second step

Next, we always start to disassemble the phone. First use a screwdriver to unscrew the screws on the memory upgrade window and remove the memory module. We can see that there is a screw next to the memory compartment, which is used to fix the optical drive. Also unscrew this screw and remove the optical drive. Then, unscrew all the screws on the bottom of the notebook and disassemble the bottom case of the notebook.

Step 3

Next, we come to the keyboard. Since the card slot of this notebook keyboard is relatively deep, we need to pay attention when disassembling the keyboard.Pay attention to some skills, but cannot directly pry it open with violence. We can use the IC card to gently lift the four buckles of the keyboard, open the keyboard and slowly reverse it, then remove the cable connected to the back of the keyboard, and then remove the keyboard.

Laptop cleaning

Step 4

Dismantling the notebook After installing the keyboard, we see various cables on the panel under the keyboard, and we need to remove these cables. Among them, the screen cable is quite special. We need to hold the auxiliary handle on the cable, pull it up and remove it. Other methods of arranging cables are relatively simple, and you only need to open the lock to pull it out.

Step 5

After removing the cable, we can completely remove this panel. Then you can see the motherboard, fan and other components of the notebook very intuitively. Among them, when cleaning, the focus we need to pay attention to is the cooling fan of the notebook. The fan of this notebook is located on the upper left side of the panel. We only need to unscrew the screws on both sides of the fan to remove it.

Notebook internal structure

Step 6

After removing the fan, use an air blower and a brush to clean it After cleaning, put the notebook parts back in reverse order

Editor’s reminder:

Editor’s reminder: